Cisco 300-710 Practice Test

300-710 practice test: what's covered

• FMC and FTD Deployment
• Access Control
• NAT
• IPS
• VPN
• HA
• Troubleshooting

Free 300-710 sample questions

1. A firewall engineer is migrating an ASA rulebase into Cisco Secure Firewall Management Center and must preserve least privilege while adding application visibility. Which response is the BEST fit?

   • A. Create an access control policy with zones, networks, applications, logging, and a default block rule
   • B. Build only prefilter rules and skip access control inspection
   • C. Permit any-to-any temporarily and rely on IPS to catch abuse
   • D. Configure NAT rules first and leave policy migration for later
   Show answer

   Correct: A. Create an access control policy with zones, networks, applications, logging, and a default block rule is the best answer because FMC access control policy is the primary enforcement point for zone, network, user, application, file, and intrusion decisions. The other choices do not fit the scenario: Build only prefilter rules and skip access control inspection addresses the wrong layer or timing, Permit any-to-any temporarily and rely on IPS to catch abuse skips a required control, and Configure NAT rules first and leave policy migration for later would create avoidable operational or security risk.

2. A team needs DNS sinkhole and URL category control for outbound user traffic on an FTD pair managed by FMC. Which response is the BEST fit?

   • A. Attach Security Intelligence and URL filtering rules to the access control policy and deploy the policy
   • B. Configure only static routes because URL categories are routing objects
   • C. Create FlexConfig for every URL category instead of using policy features
   • D. Enable site-to-site VPN because sinkhole decisions require tunnels
   Show answer

   Correct: A. Attach Security Intelligence and URL filtering rules to the access control policy and deploy the policy is the best answer because Security Intelligence and URL filtering are configured within policy inspection, not by routing or VPN configuration. The other choices do not fit the scenario: Configure only static routes because URL categories are routing objects addresses the wrong layer or timing, Create FlexConfig for every URL category instead of using policy features skips a required control, and Enable site-to-site VPN because sinkhole decisions require tunnels would create avoidable operational or security risk.

3. A data center application uses a non-standard TCP port, but the security team still needs application-aware enforcement. Which response is the BEST fit?

   • A. Use application conditions after allowing enough traffic for detection and log at beginning and end as needed
   • B. Match only the TCP port forever because application detection is unavailable
   • C. Disable Snort inspection to make application detection faster
   • D. Move the rule to NAT because application detection is a translation feature
   Show answer

   Correct: A. Use application conditions after allowing enough traffic for detection and log at beginning and end as needed is the best answer because Cisco Secure Firewall can identify applications beyond simple port matching when traffic is inspected appropriately. The other choices do not fit the scenario: Match only the TCP port forever because application detection is unavailable addresses the wrong layer or timing, Disable Snort inspection to make application detection faster skips a required control, and Move the rule to NAT because application detection is a translation feature would create avoidable operational or security risk.

4. A change window adds an intrusion policy to traffic that was previously only port-filtered. Which TWO choices should the engineer select? (Choose TWO)

   • A. Apply the intrusion policy on the matching access control rule
   • B. Deploy changes from FMC to the affected FTD devices
   • C. Reboot both FTD devices before every intrusion policy edit
   • D. Convert the access rule into a manual NAT rule
   Show answer

   Correct: A and B. Apply the intrusion policy on the matching access control rule and Deploy changes from FMC to the affected FTD devices are correct because inspection is controlled by the access rule and FMC changes are not active on sensors until deployment is completed. The distractors do not satisfy the requirement: Reboot both FTD devices before every intrusion policy edit is incomplete for this case, and Convert the access rule into a manual NAT rule solves a different problem or weakens the design.

5. A rule should bypass expensive inspection for trusted backup replication traffic without losing basic fast-path control. Which response is the BEST fit?

   • A. Create a prefilter rule for the specific backup flow before normal access control evaluation
   • B. Disable the entire access control policy during backups
   • C. Add a broad trust rule for all server-to-server traffic
   • D. Place the traffic in a VPN tunnel to avoid inspection decisions
   Show answer

   Correct: A. Create a prefilter rule for the specific backup flow before normal access control evaluation is the best answer because prefilter policies are designed for early fast-path or tunnel handling before full access control inspection. The other choices do not fit the scenario: Disable the entire access control policy during backups addresses the wrong layer or timing, Add a broad trust rule for all server-to-server traffic skips a required control, and Place the traffic in a VPN tunnel to avoid inspection decisions would create avoidable operational or security risk.

Last updated: 2026-10-19

300-710 practice test FAQ

Related practice tests

• CCIE Security Written 350-701 practice test
• CCNA 200-301 practice test
• Cisco 300-410 practice test
• CCNP ENCOR 350-401 practice test
• Cisco 100-160 practice test
• Cisco 200-201 practice test