Skip to exam content
← All Exams

CCNA 200-301 Practice Test

This bank covers CCNA 200-301 v1.1. Cisco's last test date for v1.1 is 2 February 2027. CCNA v2.0 starts 3 February 2027. A v2.0 bank is in progress.

CCNA 200-301 v1.1

Networking · Access · IP Connectivity · Services · Security · Automation · 100 questions

100
Questions
120
Minutes
70%
Techclick Practice Target

⚠️ Exam Rules

  • Once started, the timer cannot be paused
  • You can navigate freely — use Previous or the Navigator panel to revisit any question
  • Tab-switching triggers warnings (3 strikes = auto-submit)
  • Right-click and copy disabled during exam
  • If you fail, retry — questions and options reshuffle

200-301 practice test: what's covered

Questions in this Techclick bank99
Timer120 min
Techclick practice target70%
Official exam code200-301

Free 200-301 sample questions

  1. A user reports that a file transfer keeps losing packets, yet the application still receives every byte intact and in order. Which TWO functions of the OSI Transport layer make this reliable delivery possible? (Choose TWO)

    • A. Acknowledgements with windowing (flow control)
    • B. Sequencing and retransmission of lost segments
    • C. Routing packets between different IP subnets
    • D. Framing and MAC addressing on the local link
    • E. Encoding bits onto the physical medium
    Show answer

    Correct: A and B. TCP reliability uses acknowledgements with windowing plus sequencing and retransmission of lost segments. Routing is a Layer 3 function, framing and MAC addressing are Layer 2, and bit encoding is Layer 1, so those are not Transport-layer reliability functions and are incorrect.

  2. A technician plugs two PCs into the same device and sees that frames are forwarded only out the port toward the destination MAC, not flooded everywhere. Which device is forwarding based on a MAC address table at OSI Layer 2?

    • A. A router doing L3 forwarding
    • B. A LAN switch
    • C. A standalone repeater hub
    • D. A DNS server appliance
    Show answer

    Correct: B. A switch builds a MAC address table and forwards unicast frames out only the port toward the destination, which matches the observed behavior at Layer 2. A router forwards by IP at L3, not MAC; a hub floods all ports because it has no table, and a DNS server is not a forwarding device at all.

  3. You are documenting the addressing plan for the subnet 192.168.10.0/26 and must record the directed broadcast address that hosts use to reach all stations in that subnet. Which address is correct?

    • A. 192.168.10.31
    • B. 192.168.10.63
    • C. 192.168.10.127
    • D. 192.168.10.255
    Show answer

    Correct: B. A /26 mask yields blocks of 64 addresses, so the first subnet spans .0 through .63 and its broadcast is .63. The value .31 belongs to a /27 boundary, not /26; .127 and .255 fall in later /26 blocks and are therefore incorrect for the .0 subnet.

  4. A /29 is assigned to a LAN segment. How many usable host addresses does that prefix provide?

    • A. Exactly 6 hosts
    • B. Exactly 8 hosts
    • C. Exactly 14 hosts
    • D. Exactly 30 hosts
    Show answer

    Correct: A. A /29 contains 8 total addresses, and after removing the network and broadcast addresses 6 usable host addresses remain. The value 8 ignores the two reserved addresses, while 14 corresponds to a /28 and 30 corresponds to a /27, so those masks are larger than required and incorrect.

  5. While capturing IPv6 traffic on a freshly booted host, you notice an address that is automatically generated, never routed off-link, and used for neighbor discovery. Which IPv6 prefix identifies this address type?

    • A. FE80::/10 link-local
    • B. FF00::/8 multicast
    • C. FC00::/7 unique local
    • D. 2000::/3 global unicast
    Show answer

    Correct: A. Link-local addresses use the FE80::/10 prefix, are auto-configured on every interface, and are confined to the local link for functions like neighbor discovery. FF00::/8 is multicast and FC00::/7 is private unique-local, while 2000::/3 is globally routable, so none of those is correct for an unrouted on-link address because they are not link-local.

Last updated:

200-301 practice test FAQ

Is this 200-301 practice test free?

Yes. You can start, finish and score it for free, and download the Techclick practice certificate.

How many questions are in the Techclick 200-301 practice test?

This bank has 99 original scenario-based questions with a 120-minute timer and a 70% Techclick practice target.

What is the official exam code and format?

The official exam is Cisco 200-301 CCNA v1.1, a 120-minute exam. v1.1 can be taken until 2 February 2027. v2.0 starts 3 February 2027.

Are these real 200-301 exam questions or dumps?

No. They are original practice questions written by Techclick. This is not the vendor's official exam and not leaked dumps.

Do I get a certificate?

Score 70% or higher to get a Techclick practice certificate and LinkedIn badge. It is not an official Cisco certification.

What should I take after 200-301?

Related practice tests: 350-401, 350-701, 200-201, N10-009, 100-160, 200-901 (linked below).

Techclick Infosec
TECHCLICK INFOSEC
CYBERSECURITY · PRACTICE ASSESSMENT
🔌
PRACTICE ASSESSMENT
CISCO CCNA
CCNA 200-301 v1.1
AWARDED TO
{NAME}
SCORE
0%
DATE
--
TC-NGFW-XXX
Practice certificate · not independently verified · Techclick Infosec Pvt Ltd · +91 92772 29456